3D Printerr
-
Today we started with designing in antimony, We started with Antimony software. Made a 3D design file for keeping the bits of the modella.
Before starting designing franc gave us an overview of designing and tips to make good design .
Take care of the levelling of the plate and make the distance between extruder head and the plate optimum. 45 degree is the maximum allowable slope. If it is higher than 45, the software will add support material. We must try to avoid the use of the support material. Positioning of the shape is also very crucial. The orientation will change according to the application of the printed object.
After designing we need to export it as .stl file. This .stl is to be converted using Cura to gcode.
